Method of mixing powder into gold discovered that is not detected by standard instruments
Read more
Aaj Tak
www.aajtak.in

Method of mixing powder into gold discovered that is not detected by standard instruments

When purchasing gold, consumers expect to receive a pure item for the full price. To do this, people check the hallmark and use machines in stores to assess the purity of the gold. However, a situation has arisen where a metal could have been added to the gold that is not recognized by ordinary measuring instruments, which casts doubt on the methods of checking the purity of jewelry.

According to media reports, a powder called Rhenium is used to increase the weight of gold. It is claimed that after adding this powder, some standard instruments may erroneously show a higher purity. Such a case was identified in the city of Jodhpur, Rajasthan, where the inspection of jewelry showed 22 carats, although the actual content of pure gold was significantly lower.

Nevertheless, one experiment does not prove that gold mixed with Rhenium is sold across the country on a large scale. It is important to understand what Rhenium is, how its addition affects gold, and how buyers should exercise caution when making purchases.

What is the Rhenium powder causing discussion?

Rhenium is a rare metal used for many industrial purposes. It is especially used in equipment and alloys that must withstand very high temperatures and pressure. A characteristic of this metal is its high density. Pure gold has a density of about 19.3 grams per cubic centimeter, while the density of Rhenium is approximately 21 grams per cubic centimeter.

It is this difference in density that causes concern about adding Rhenium to gold. Although adding this metal can increase the overall weight of the item, it does not mean that the gold content has increased proportionally. Simply put, the customer pays for the total weight of the item, but if another heavy metallic substance is added instead of gold, they do not receive as much pure gold as they expect.

How was the adulteration case in Jodhpur revealed?

According to the media, the jewelry was prepared using Rhenium powder with the assistance of a jeweler. In an experiment, 1 gram of Rhenium powder was added to 7,830 grams of pure gold, resulting in a total mixture weight of 8,830 grams. Then, another metallic substance was added to this mixture to give it 22-carat characteristics.

The total weight of the finished item was 9,580 grams. After that, the jewelry was sent to various testing centers and jewelry salons to determine its purity. According to the report of one assaying center, it was marked as 22 carats, or 916 purity. Furthermore, a machine at one salon showed that the item contained 93.70% gold, 5.39% silver, and 0.90% copper, and the presence of Rhenium was not detected.

However, based on the actual amount of pure gold used, the real gold content in the item was about 81.7%, corresponding to a purity of approximately 20 carats, even though it was declared as 22 carats.

Why couldn't the machine detect impurities in the gold?

Usually, XRF machines are used in jewelry stores and centers to determine the purity of gold. This instrument works based on X-ray fluorescence technology. Simply put, it directs X-rays onto the item and identifies the metals present on the surface. The machine then indicates the percentage content of gold, silver, copper, and other metals.

But this technology also has limitations. The XRF machine mainly analyzes only the top layer of the item. If the amount of metals inside and outside the item differs, surface analysis will not provide a complete picture. This is why readings obtained only from the machine cannot be considered conclusive proof of the item's full purity in any situation.

This does not mean that all XRF machines are incapable of detecting Rhenium. Results may vary depending on the technology of the machine itself, its calibration, and the testing methods used.

Can the hallmark also be fake?

The purpose of hallmarking is to confirm the purity and identification of gold. In India, the hallmarking system is controlled by the Bureau of Indian Standards (BIS). Gold items bear the BIS mark, a purity number, and a unique hallmark identification number (HUID). However, one cannot blindly trust an item based solely on the presence of a hallmark. If there are suspicions about the item's purity, it can be retested.

According to BIS guidelines, in addition to XRF testing, methods such as Fire Assay can be used to determine the actual gold content. In fire assay, a small sample of the item is subjected to testing, and this method is considered sufficiently reliable for establishing the true amount of gold.

How should a buyer exercise caution when purchasing gold?

If you plan to purchase gold jewelry, you can reduce the risk of fraud and adulteration by paying attention to several important points.

Always check the BIS hallmark

When buying gold, always check for the BIS mark on the item, as well as its purity in carats and the six-digit HUID number.

Check HUID via the BIS Care app

Through the BIS Care app, you can enter the item's HUID number and view its information, including the item's purity and details about the jeweler.

Similar stories

Before selling or exchanging old gold, clarify 8 important points with the jeweler
Read more
www.aajtak.in

Before selling or exchanging old gold, clarify 8 important points with the jeweler

If you have an unexpected need for money or require large expenses, selling old gold jewelry might seem like a simple solution. Many people also prefer to exchange old items for new ones. However, before visiting a jeweler, it is crucial to understand that the value of old gold is not determined by the current market price of 22-carat or 24-carat gold.

The final amount depends on the purity of the gold, its actual weight, the jeweler's purchase price, and various deductions. Deductions are often made under the pretext of weight or purity, which the client may not fully understand. Therefore, before selling old gold, you need to know how its price is set and what questions to ask the jeweler.

The price of old gold mainly depends on three factors: the actual weight of pure gold in the item, its fineness (whether it is 22, 18 carat, or another), and the purchase price at which the jeweler is willing to buy the gold, based on its purity on that day. The total weight of the jewelry alone is insufficient to determine its value; the jeweler weighs only the pure gold separately, excluding impurities.

The jeweler first weighs the entire piece, including stones, pearls, enamel, lacquer, and wax. Only after deducting the weight of these components is the true weight of the gold determined. For example, if the total weight of the item is 20 grams, and the stones weigh 1.5 grams, the net weight of the gold will be 18.5 grams. Therefore, you should ask the jeweler to separately record the total weight and the weight of the stones or other parts.

After weighing, the jeweler checks the purity of the gold. Generally, 22-carat gold contains 91.6 percent pure gold, and 18-carat gold contains 75 percent. For this, many jewelers use X-ray fluorescence (XRF) analysis. This device allows checking the metal's structure without damaging the jewelry, although it mainly analyzes the surface. In some cases, additional verification may be required to confirm the results. If the jeweler claims a purity lower than indicated on the hallmark, demand a written certificate of inspection.

Suppose you have a 20-gram necklace made of 22-carat gold with stones weighing 1.5 grams. Then the net weight of the gold will be 18.5 grams. Since 22-carat gold contains about 91.6% pure gold, the necklace contains approximately 16.95 grams of pure gold. If the price of 24-carat gold is taken as 13,800 rupees per gram, its value will be about 233,855 rupees. It is important to remember that many jewelers and gold brands apply a certain deduction (margin) when buying old gold.

The price at which a jeweler sells a new item in the store is not necessarily the price at which they will buy your old gold. The retail price of a new item and the purchase price of old gold can differ. The purchase price may also account for processing, testing, and refining costs. Therefore, before selling the jewelry, ask for the purchase price corresponding to its purity. For example, a difference of 100 rupees per gram in the purchase price can mean a difference of 1,000 rupees for 10 grams and 5,000 rupees for 50 grams. Also, ask if the stated rate includes costs for testing and refining.

Not all deductions when selling old gold are unjustified, but their reason and calculation must be transparent. Pay special attention to ensuring that the weight of stones, enamel, lacquer, and wax is separated from the weight of the gold. The process of soldering or repair can affect the gold's purity, which should be reflected in the inspection. The jeweler may charge for testing and refining, but they must inform you in advance about what work and what amount the deduction is for. You should contest unilateral percentage reductions without apparent reasons. If costs for purity and processing have already been accounted for, request justification for a repeated deduction. When comparing prices from different buyers, look not only at the price per gram but also at the final amount after accounting for purity and all deductions.

If your jewelry has an Indian Bureau of Standards (BIS) hallmark and a six-digit unique identification number (HUID), you can check this information in the BIS CARE application. The hallmark confirms the certified purity of the jewelry, which can strengthen your position with the buyer. Although the jeweler may conduct a check using an XRF machine, if the test shows lower purity than indicated on the hallmark, do not immediately agree to a lower price. Demand a written report of the inspection. Do not allow anyone to melt or scratch your jewelry without your consent. If necessary, you can have the check performed at an accredited BIS center for a fee. If a decrease in purity is confirmed, find out about the procedures for filing a complaint and compensation with BIS.

Before selling old jewelry in the same store where you bought it, it is worth considering that there is no guarantee of receiving the full amount when returning old items. Some jewelers...

Popular